Are you looking to buy rod ends? Also known as heim and rose joints, they are used to create mechanical joints. Rod end bearings feature a threaded rod that’s attached to a bearing. You can use a rod end to … Read More

Airplanes are methodically manufactured so that they can withstand the harsh environment of high-altitude flights. At 30,000 feet, temperatures can range from minus 40 degrees to minus 60 degrees Fahrenheit. Along with these subfreezing temperatures, airplanes are exposed to turbulence, … Read More

When installing fasteners on an airplane, you may want to use locking wire. Airplanes feature thousands of fasteners. Over time, some of these fasteners may loosen. Locking wire can “lock” them in place, however, so that they don’t loosen. What … Read More

Airplanes are often designed with a variety of wing devices. Gurney flaps are among the smallest wing devices. Located on the trailing edge of an airplane’s wings, they affect air pressure. Not all airplanes have gurney flaps. Since being introduced … Read More

Hex nuts are synonymous with threaded fasteners. They are typically used to secure the end of a bolt. After placing a bolt through two or more workpieces or parts, you can install a hex nut on the end of the … Read More

Airplanes are equipped with several different types of lights. In addition to landing lights, for instance, they feature anti-collision lights. The U.S. Federal Aviation Administration (FAA) requires all airplanes to have them. What are anti-collision lights exactly, and how do … Read More

Most airplanes feature hundreds of thousands of fasteners. In addition to traditional fasteners like bolts, they typically feature blind rivet nuts. Blind rivet nuts are permanent fasteners consisting of a threaded cylindrical shaft. Here are some of the top benefits … Read More

Airplanes are regularly exposed to stress. Commercial airplanes, for instance, typically have pressurized cabins that mimic the atmosphere of 7,000 to 8,000 feet above sea level. All of this pressure will push against the inner walls of the airplane’s body. … Read More

Whether a cable is used in a landing gear pulley system, a machine or any other application, it may require an anchor point. Anchor points are designed to terminate the ends of cables while simultaneously securing the cables in place. … Read More